Showing 17–26 of 26 results

Guardian Mini

Guardian Mini

A full APS solution in a compact package, the Guardian Mini provides important cues to assist all pedestrians to cross the intersection safely by providing audible, tactile, and visual indications at the crosswalk. Ready to install out of the box, the Guardian Mini utilizes existing mounting holes from an ADA button and a four conductor cable to connect to the Signal Power Interface (SPI) in the pedestrian signal head.

VIEW: Guardian Mini APS Data Sheet

APS Beacon & BBU

APS Beacon & BBU

Pedestrian beacon communication has reached a whole new level. Campbell Company’s APS Beacon provides intelligent communication to pedestrians crossing the intersection by utilizing audible indications. Please see the Beacon Data Sheet for information on parameters, installation, and features.

Destination Communication

The APS Beacon provides a beacon tone to the pedestrian from a second speaker location near the pedestrian display, aimed towards the center of the crosswalk. The pedestrian is at the initiation point where they place a call at the push button, and the APS Beacon is located at the pedestrian destination point, about 10 feet high where it can broadcast “Walk” and “Clearance” phase tones to the final two-thirds of the crosswalk. Several different “Clearance” phase tones are available including: destination target, alternating (ping pong) tones, audible countdown, and other specifically designated tones.

Independent Station

The Beacon can also function as a Base Broadcast Unit (BBU) to provide important information to assist all pedestrians in crossing the intersection with audible indications when the “Walk Display” is active. The BBU is designed to work in areas where there is no pedestrian activation. In traffic applications, the BBU is mounted to the underside of the pedestrian display. Audible walk indications are broadcast from a position above the pedestrian initiation point during the visual walk display.

Signal Power Interface (SPI)

£0.00

Product Information:

NOTE: You MUST use the SPI XC if powering an APS Beacon/BBU from the same SPI as an AGPS or Guardian unit.

Standard Extensions Brackets (APS)

£0.00

Overview

The APS Extension Bracket allows for a great deal of flexibility in mounting multiple pedestrian stations on smaller diameter utility poles. Its sleek design and modular assembly allows for a variety of extension lengths (up to 18”) that can be mounted on just about any utility pole diameter. Great for bringing older crosswalk setbacks into compliance with current MUTCD and ADA guidelines.

Mounting Options

An excellent solution for multiple large pedestrian stations (9×12 or 9×15) to be mounted perpendicular on a shared pole, the APS Extension Bracket can be banded or bolted with slotted mounting holes for use with taps on existing poles. The bracket comes with adjustable aluminum bumpers that snug securely to any diameter pole as it is fasten down. A threaded chase nipple allows for wire protected entry into the pole.

VIEW: Extension Bracket Data Sheet

Telescoping Extensions Brackets

£0.00

Overview

The Telescoping Extension Bracket provides the installer adjustability of a pedestrian push button to be conveniently located near each end of the crosswalk for easy activation. Loosening the two set screws on each of the outer extension tubes allows for the bracket allows the push buttons to be moved out as much as 24”, great for bringing older crosswalk setbacks into compliance with current MUTCD and ADA guidelines. The Telescoping Extension Bracket (GMB) also allows for mounting two pedestrian stations on smaller diameter poles.

Mounting Options

The Telescoping Extension Bracket can be banded or bolted to the pole. The mounting holes on the pole mount bracket are slotted allowing for the use of existing holes. The mounting adapter plate is designed to allow all Campbell Company pedestrian stations to be quickly and easily installed. The design provides service wires to be routed through the lower tube. Each pole mount bracket is equipped with a threaded chase nipple that protects the lead in wires from sharp edges as well as providing drip protection The brackets come with adjustable rubber buttons that snug securely to any diameter pole.

Materials

The extension bracket plates and extension tubes are machined from 6061 T6 Aluminum. All mounting hardware is stainless steel. MPS Extension Brackets are powder coated.