Latching LED Isolator Interfaces

£0.00

Overview

PedSafety’s Latching LED Isolator Interfaces synchronize multiple 4 EVR MOAB Pedestrian Push Buttons on the same phase in a latching LED mode. By installing either a PBIC (Push Button Interface Card) or a PBI-L (Push Button Interface – Latching) the LED on the 4 EVR MOAB will remain lit after the button has been pressed until the walk display on the pedestrian signal head is displayed. The PBIC and PBI-L bring intersections up to ADA and MUTCD standards.

Configuration

One PBIC-24/PBI-L manages up to four phases, and 16 push buttons. For large complex intersections, multiple modules can be added to service additional phase requirements.

VIEW: PBIC-24 / PBI-L Data Sheet
VIEW: PBI-L Quick Installation Guide

Category: SKU: 345-1-1-2

Description

Installation

The PBIC-24 slides in to the 24V detector rack in the control cabinet (note detector rack must be supplying 24V to PBIC-24). One PBIC-24 manages up to four phases, and 16 pedestrian push buttons. Multiple modules can be added to service additional phase requirements.

The PBIC-120 slides in to the 120V detector rack in the control cabinet (note detector rack must be supplying 120V to PBIC-120). One PBIC-120 manages up to four phases, and 16 pedestrian push buttons. Multiple modules can be added to service additional phase requirements.

The PBI-L is hardwired in the control cabinet. One PBIL manages up to four phases, and 16 push buttons. For large, complex intersections, multiple modules can be added to service additional phase requirements

Additional information

Choose Product Options

PBIC-24, PBI-L

Product Drawings, Specs & Manuals