Showing all 7 results

4 EVR MOAB

£0.00

Overview

The 4 EVR MOAB is the toughest button on the market. The MOAB is the next generation of solid-state pushbuttons, with a superior machined aluminum bezel it is resistant to vandalism, impact, extreme weather and neglect the MOAB is a proven reliable button. The MOAB utilizes a new flush mount form factor and features higher volume, lower power consumption, self-latching capability, and improved transient protection than previous buttons. With no moving plunger or electrical contacts, it is completely insulated to preclude electrical shock under any weather condition. The MOAB utilizes a piezo switch element that cannot be stuck in a constant call. The actuator is pressure sensitive and mechanically isolated from the piezo switch so it cannot be damaged

Features

  • Solid State Piezo Switch
  • Pressure Sensitive
  • Flush Mount, Button Cups Not Required
  • Cannot be stuck in Constant Call
  • Virtually Vandal Proof
  • Programmable at the intersection – Momentary and Latching LED Modes
  • Lower Power Consumption
  • Louder Audible “Dee-Dah” Feedback
  • ADA, MUTCD, and TAC Compliant
  • 5 Year Limited Warranty

VIEW: 4 EVR MOAB Pedestrian Push Button Sales Sheet

4 EVR Pedestrian Push Button

£0.00

Overview

The 4 EVR is digitally controlled and virtually vandal proof. Impact resistant to sticks, skateboards, baseball bats, hammers, and similar objects. The 4 EVR utilizes a Piezo switch element that cannot be stuck in a constant call. An LED and audible tones are momentarily activated with the pedestrian call. The actuator is pressure sensitive and uses no screws or bolts in the functioning areas.

Features

  • Solid State Piezo Switch
  • Pressure Sensitive
  • Cannot be stuck in Constant Call
  • Virtually Vandal Proof
  • LED and Audible Tones
  • ADA and MUTCD Compliant

VIEW: 4 EVR Pedestrian Push Button Data Sheet

Series Mechanical Push Button

£0.00

Overview

This line of robust push buttons is all metal construction to offer a great value against direct abuse. The switch is a phenolic enclosed precision snap action, single pole, double throw type. A passive linear bearing is utilized to reduce the coefficient of friction in the functional components. All components are machined to precise dimensions and finish.

Features

  • Mechanical, snap action switch
  • Durable and Vandal Proof
  • ADA and MUTCD compliant
  • Made from solid stock
  • 5 year warranty

VIEW: Series Mechanical Push Button Data Sheet

Typical Movement Push Button (Round and Rectangle)

£0.00

Overview

Typical Movement (TM) push button is a spring actuated pressure sensitive Peizo switch that cannot be stuck in a constant call. It is designed to look and feel like a mechanical push button with the electrical specifications and life span of a solid state switch. 5 year warranty. ADA compliant.

Features

  • Solid State Piezo Switch
  • Cannot be stuck in Constant Call
  • Vandal Proof
  • ADA and MUTCD Compliant
  • 5 yr Warranty

VIEW: Typical Movement Pedestrian Push Button Data Sheet

Button Cups – Round and Rectangle

£0.00

Overview

Campbell Company manufactures button cups for round and rectangle push buttons. These button cups are machined from solid stock and provide service entry from the back. Bottom access can be added for an additional fee. All Campbell Company button cups are machined from solid 6061 T6 rod or bar stock.

VIEW: Button Cup Data Sheet

nxtCycle – Cyclist Push Button

£0.00

Where Safety Meets Innovation

Cyclists typically travel faster than pedestrians, so why have them use pedestrian cycle time? Return to coordination or advance to the next phase sooner with nxtCycle™. Accurate bicycle detection and acceptable cycle lengths make crossing the intersection safer for cyclists by providing a sufficient amount of time to clear the intersection. The push button is located in a convenient location for the cyclists so they can activate the signal without dismounting. The nxtCycle™ can also be used to prolong the green phase to provide adequate times for bicyclists to clear the intersection.

Overview

Campbell Company’s nxtCycle™ push button is an excellent detection solution that can be installed in an easily accessible location for cyclists, allowing them to activate the signal without dismounting, using the pedestrian buttons, or crossing illegally. The ergonomically designed handle, durable construction, and large actuation surface make nxtCycle™ an excellent choice for innovation at the intersection.

Features & Benefits

  • Simple and easy installation
  • Field wire connection
  • LED call indicator
  • Latching and non-latching available
  • Increases bicycling safety
  • Discourages illegal crossing by cyclists

VIEW: nxtCycle Push Button Data Sheet

Latching LED Isolator Cards

£0.00

Overview

The Push Button Interface Card (PBIC-24) or (PBI-L) synchronizes multiple 4 EVR Push Buttons on the same phase in a latching mode. An audible “Dee-Dah” feedback as well as having the LED latch for all push buttons on that same phase will latch until the walk display is energized. The PBIC-24 and PBI-L is ADA and MUTCD compliant.

Configuration

One PBIC-24/PBI-L manages up to four phases, and 16 push buttons. For large complex intersections, multiple modules can be added to service additional phase requirements.

VIEW: PBIC-24 / PBI-L Data Sheet
VIEW: PBI-L Quick Installation Guide