Pedestrian Stations: Signs, Hardware
Modular Pedestrian Stations
The MPS button cup is the housing for the push button and attaches seamlessly to the display. Button cups are available for round or rectangular push buttons. Each button cup provides for back or bottom service with a removable chase nipple and plug.
The MPS display is the backplate of the pedestrian station. This component provides the area to mount the sign, mount adjustable saddles for pole adjustment, and attach to the pole.
- 57 mounts a 5 X 7 ¾” sign
- 912 mounts a 9 X 12” sign
- 915 mounts a 9 X 15” sign
- 921 mounts a 9 X 21” sign
The MPS button cup is attached to the display. Button cups are available for round or rectangle push buttons. The button cup also attaches to the pole. Each button cup provides for back or bottom service with a removable chase nipple and plug.
Cast Pedestrian Stations
Campbell Company manufactures several cast pedestrian stations. The cast pedestrian stations provide an integral push button mount and sign display platform. Each pedestrian station has adjustable mounting saddles to provide a snug fit to any pole, wire chase for service entry, and all hardware required for mounting the pedestrian station and sign.
H Frame
Campbell Company H Frame pedestrian stations provide the pedestrian with the maximum amount of information available in a passive form. Instruction is presented from all approaches with a clear indication of the direction of the crossing.
The H Frame provides the maximum protection for the pedestrian Push Button. H Frame pedestrian stations provide IP 65 environmental protection. Service may enter from the top, bottom or back of the units.
Button Cups
Campbell Company manufactures button cups for round and rectangle push buttons. These button cups are machined from solid stock and provide service entry from both back and bottom. Each button cup is supplied with a removable chase nipple and plug.
Mounting Hardware
Round PPB 6” extension allows the PPB to be extended 6 inches from the original position.
H extension bracket (HEB) allows the H frame to be extended away from the pole.
Ganged mounting Brackets (GMB) allows two pedestrian stations to be mounted adjacently on a four inch pole.
Signs and Films
Campbell Company provides a variety of signs and films in different sizes and materials. We also provide Braille, Wayfinding, and Pictogram signs that meet ADAAG, ANSI, and MUTCD standards.