|Item Description||Beacon (Includes 503-0300 SPI)|
NOTE: You MUST use the SPI XC (p/n 501-0301) if using an APS Beacon/BBU with an AGPS or Guardian unit.
- Wrinkle Black
- Federal Yellow
- Federal Green
- Gloss Black
- Other (Specify)*
- Beacon Mount (FS)
- BBU Mount
- Beacon Unit
- Pan Tilt Bracket for Mounting
- All Mounting Hardware
- Signal Power Interface (SPI)
- USB Programming Cable
- Customized Voice Messages (if needed)
- APS Programming Software
- Powder coating in specialized colors
Each APS Beacon is configured at the factory and customization is easily done by utilizing any laptop with a USB connection. Our menu-driven utilities guide users through set-up, downloads, and adjustments.
The APS Beacon provides a beacon tone to the pedestrian from a second speaker location near the pedestrian display, aimed towards the center of the crosswalk, or extending from the bottom of the pedhead. The pedestrian is at the initiation point where they place a call at the push button, and the APS Beacon is located at the pedestrian destination point, about 10 feet high where it can broadcast “Walk” and “Clearance” phase tones to the final 2/3rds of the crosswalk. Several different “Clearance” phase tones are available including: destination target, alternating (ping pong) tones, audible countdown, and other specifically designated tones.