VTO – APS

The VTO—APS:

A discrete method to provide information to the pedestrian.

Is a simple and affordable alternative to tell the pedestrian when the Walk Light is on.

The push button begins to vibrate when the Walk Light is turned on and stops when the Walk light is no longer on.

Electrical Specifications:
VTO Driver inputs 120 VAC from Ped Head
VTO Driver outputs 12 VDC to PPB
Rated Lifetime > 20 X 10 6 Cycles
Mechanical Data:
Minimum Activation Force: 1.5 N
Degree of Protection– Sealed: 67 IP (impervious to dirt, sand, dust, water)
Environmental Range:
Operating Temperature: -40 C to 60 C
Moisture / Corrosion: No Concern (Sealed)
Installation:
VTO-APS installs in ped head in minutes. Attach 120 VAC side to Walk Sign inputs, Attach 12 VDC side to VTO– APS PPB
Materials:
Bezel: Machined solid 6061 T6 AL ingot or PVC Type I (VO)
Actuator: Machined 303 Stainless Steel or PVC Type I (VO)
Field Terminals: Stainless screws and brass terminals (non-corrosive)
Hardware: All Stainless Steel
Colored Surfaces: Hard Enamel Powder Coat
Mounting:
3 inch round mounts with 4 bolts in a 2.60” +/- .05” bolt circle
Rectangle mounts with a 1.9” X 3.25” bolt pattern

The Campbell Company has provided access at the intersection for over 30 years. We are proud to manufacture and support products that allow all individuals access to our community. We stand behind our products and guarantee complete satisfaction.

manufactured by:

Campbell Company

V 208.345.7459

F 208.345.7481